Radio Shack TAD-1026 Answering Machine User Manual


 
19
Important: Do not tell callers that
you are not home. Instead, say that
you cannot come to the phone right
now.
3. When you finish recording, press
STOP/T-SET.
The TAD automatically
plays back the outgoing message.
To play back your outgoing OGM1 mes-
sage at any time, press
OGM1
.
A1
ap-
pears, the TAD beeps, and the outgoing
message plays.
To play back your OGM2 message at
any time, press
OGM2
,
A2
appears, the
TAD beeps, and the announcement-only
message plays.
SETTING THE NUMBER
OF RINGS
The ring select switch on the back of the
TAD controls how long the TAD waits
before it answers a call. Slide the switch
to the appropriate position.
2
— The TAD answers after two rings.
4
— The TAD answers after four rings.
7
— The TAD answers after seven rings.
T.S.
(Toll Saver) — If there are new mes-
sages, the TAD answers after two rings.
Otherwise, the TAD answers after four
rings. This lets you avoid unnecessary
charges when calling by long-distance to
check your messages. If you hear more
than two rings, you know you can hang
up because the TAD has no new mes-
sages.
43-786.fm Page 19 Monday, August 16, 1999 8:02 AM