Filter
Top Products
8
PREPARATION
Complete the procedures in this sec-
tion before you set the TAD to answer
calls.
Notes:
• The keypad is located under the
cover on the front of the TAD. Lift
the cover to access the keys.
• Before you begin any of the pro-
cedures in this section, be sure
the TAD is turned on (see “Turning
the TAD On/Off”).
TURNING THE TAD
ON/OFF
To turn on the TAD, simply press
ON/
OFF
so ON LINE turns on.
To turn the TAD off, press
ON/OFF
again so ON LINE turns off.
Notes
:
• Once you turn the TAD on, it is set
to answer calls (see “Setting the
TAD to Answer/Not Answer
Calls”).
• You can also turn the TAD on
remotely (see “Remote Answer-
On”).
SETTING THE DAY
AND TIME
You must set the current day and time
so the TAD will record the day and time
(date stamp) on each memo, incoming
message, and 2-way conversation it
records.
Notes
:
• If you do not set the date and
time, the TAD will not record a
date stamp.
• In Steps 2-6, you must enter your
selection within 7 seconds after
the TAD finishes saying the
instruction. Otherwise, the TAD
beeps three times, then exits the
program mode. If this happens,
start over again at Step 1.
1. Press
PGM/DEL
. The TAD beeps
once.
illustration
illustration
illustration
43-781.fm Page 8 Monday, August 16, 1999 7:41 AM