Filter
Top Products
15
RECORDING A MEMO
A memo is a message that you record
by speaking directly into the TAD, with-
out calling in on the phone line.
1. Press and hold
MEMO
until the
TAD beeps. The ON LINE indica-
tor flashes and the MEMO indica-
tor lights steadily.
2. Release
MEMO
and record your
message. Speak into the TAD
from about 12 inches away.
3. When you finish speaking, press
ON/OFF
. The TAD beeps once
then the ON LINE indicator lights
steadily. The MEMO indicator
flashes to indicate that you have a
“memo” message.
To play back a memo, see “Playing
Memos.”
PLAYING MESSAGES
Notes
:
• During playback of any message
type (incoming message, memo,
or 2-way conversation), you can
repeat the current message, or
skip backward or forward to the
previous or next message.
— To repeat the current mes-
sage, press
7/
<
— To skip back to the previous
message, press
6/
— To skip forward to the next
message, press
9/
• To delete any type of message,
see “Deleting Messages.”
• To stop playback of any message
at any time, press
ON/OFF
.
Playing Incoming Messages
The PLAY indicator flashes after the
TAD records one or more incoming
messages. To listen to an incoming
message(s), press
PLAY
. The TAD
tells you how many messages it has
recorded. For example, if there are
three messages, the TAD says “Three
messages.”
The TAD plays each recorded mes-
sage, one after the other, beginning
with the most recent one. At the end of
each message, the TAD announces
the day and time the message was re-
corded. After playing the last message,
the TAD beeps once.
After you play the message(s), the
PLAY indicator lights steadily and the
TAD automatically saves the mes-
sage(s) and resets to answer calls. To
replay the incoming message(s), sim-
ply press
PLAY
again.
illustration
43-781.fm Page 15 Monday, August 16, 1999 7:41 AM