Radio Shack TAD-1003 Answering Machine User Manual


 
9
PREPARATION
SETTING THE DAY AND
TIME
The TAD records the day and time of the
call with each phone message. Follow
these steps to set the day and time.
Notes
:
To avoid having to reset the time if
AC power is lost, we recommend
you install a backup battery before
you set the day and time.
If you do not complete each step
within 8 seconds, the TAD sounds a
three-tone beep and stops setting
the day and time.
1. Press and hold
SET
until the TAD
beeps. The TAD announces, “Sun-
day,” and
01
appears on the dis-
play.
Note
: If necessary, adjust
VOLUME
at the right side of the TAD to the
desired listening level.
2. To change the day of the week,
within 8 seconds after the TAD
beeps, repeatedly press
REPEAT
to
move backward or
SKIP
to move
forward until the TAD announces
the desired day of the week.
3. Press and release
STOP
. The TAD
beeps once and announces the
time format, “AM” or “PM.”
4. To change the hour, repeatedly
press
REPEAT
to move backward
or
SKIP
to move forward to the
desired hour.
5. Press and release
STOP
. The TAD
beeps once to confirm the hour set-
ting.
6. To change the minutes, repeatedly
press
REPEAT
to move backward
or
SKIP
to move forward to the
desired minute setting.
7. After you set the day of the week,
the hour, and the minutes, press
STOP
to confirm the settings. The
TAD beeps and announces the day
and time.
8. To check the current day/time at
any time, press
SET
.
43-743.fm Page 9 Friday, August 13, 1999 2:05 PM