Filter
Top Products
16
REMOTE OPERATION
You can operate the TAD from almost
any touch-tone phone, or from a rotary
phone using a pocket tone-dialer (avail-
able at your local Radio Shack store).
The TAD’s remote operation security
code is preset to 743. You can operate
your TAD remotely with this code; how-
ever, we recommend that you set your
own code.
Notes
:
• When the memory is full, the TAD
answers the call after two rings and
announces, “Memory is full.”
• To bypass the outgoing message
and begin recording a message
immediately when you call the TAD
from a remote phone, you can
press
]
on touch tone phones (or a
pocket tone dialer if you use a
rotary phone) when the announce-
ment begins. The TAD skips the
rest of the announcement, beeps
once, and begins recording.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
Notes
:
• Be sure to set each digit within 8
seconds. Otherwise, you must start
over from Step 1.
• Do not use three identical digits
(such as 999) for the security code.
Numbers like this are too easy for
others to guess!
• If the AC power fails or if the
backup battery becomes weak, the
remote operation security code
automatically resets to 743.
1. Press and hold
CODE
for about 2
seconds. The TAD beeps and the
first digit of the preset code flashes.
43-743.fm Page 16 Friday, August 13, 1999 2:05 PM