Filter
Top Products
8
2. Snap the battery’s terminals to the
connector inside the compartment.
3. Replace the cover
When
Lo
and the two-digit number of
calls in memory alternately flash on the
display, replace the battery. Be sure the
AC adapter’s cord is plugged in so you
do not lose the TAD’s stored informa-
tion.
USING RESET
If AC power fails or the TAD does not
work, press
RESET
on the back of the
TAD to reset the answering machine.
Notes
:
• The outgoing message and all
information stored in memory are
erased when you press
RESET
.
• During a power failure, the TAD
cannot answer incoming calls or
record messages.
43-743.fm Page 8 Friday, August 13, 1999 2:05 PM