Filter
Top Products
10
RECORDING THE
OUTGOING MESSAGE
Before you can set the TAD to answer
calls, you must record the outgoing mes-
sage (OGM) the caller hears when the
TAD answers a call.
Note
: The maximum outgoing message
length is 30 seconds.
1. Press and hold down
ANN
. The
TAD beeps.
Note:
When memory is full, the
TAD announces, “Memory is full,”
and you cannot record the outgoing
message.
2. Speak in a normal voice about 8
inches away from the microphone
(located on the front of the TAD).
Ask for the caller’s name, phone
number, and message. The display
shows how much time is left for
recording.
Important
: Do not tell callers that
you are not home. Instead, say that
you cannot come to the phone right
now.
3. When you finish recording, release
ANN
. The TAD automatically beeps
and repeats the outgoing message
so you can verify it.
4. Adjust
VOLUME
at the right side of
the TAD to the desired listening
level.
To play the outgoing message at any
time, press and release
ANN
. If no out-
going message is recorded, the TAD
says “No announcement.”
43-743.fm Page 10 Friday, August 13, 1999 2:05 PM