Filter
Top Products
17
2. Press
SKIP
or
REPEAT
to set the
first digit, then press
STOP
. The sec-
ond digit flashes.
3. Press
SKIP
or
REPEAT
to set the
second digit, then press
STOP
. The
third digit flashes.
4. Press
SKIP
or
REPEAT
to set the
third digit, then press
STOP
. The
TAD beeps once.
REMOTE ANSWER-ON
Note
: You must record an outgoing
message before you can remotely set
the TAD to answer calls.
Follow these steps to remotely set the
TAD to answer calls.
1. Dial your phone number.
• If the TAD is set to answer-off, it
answers the call after 60 seconds
and announces, “Answer off.”
• If the TAD is set to answer-on, it
answers after about two or four
rings.
2. Enter the remote operation security
code within 8 seconds. The TAD
beeps.
3. Press
#
. The TAD beeps and
announces, “Answer on.” If you do
not enter each digit of the security
code within 8 seconds, the TAD will
disconnect.
4. You can hang up at this point and
have the TAD set to answer calls. If
you want, you can now enter other
remote command(s) (see “Using
Remote Commands”).
Tollsaver
If there are new messages, the TAD an-
swers after about two rings. Otherwise,
the TAD answers after four rings. This
lets you avoid unnecessary charges
when calling by long-distance to check
your messages. If you hear more than
two rings, the TAD has no new messag-
es. Hang up so you will not be charged
for the call.
43-743.fm Page 17 Friday, August 13, 1999 2:05 PM