Filter
Top Products
29
CALLER ID MESSAGES DIALING NUMBERS FROM
A CALLER ID RECORD
To dial a local number stored in a Caller
ID record, recall the record, then press
LINE 1
or
LINE 2
. If it is a long distance
call, press
1
(
1
appears before the dis-
played number) before you press
LINE 1
or
LINE 2
.
Notes:
• You can use either line to make a
call. For example, you can use Line
2 to make a call to the number
stored in Line 1 Caller ID memory.
• If a Caller ID record does not con-
tain a phone number (if it was
blocked by the caller, for example)
you cannot dial from that record.
STORING A CALLER ID
RECORD TO MEMORY
Follow these steps to store the name
and number from a Caller ID record into
a memory location.
1. Recall the record you want to store,
then press
MEMORY
. Select
Location
appears.
2. Choose a memory location (01–30)
by pressing number keys or by
repeatedly pressing or then
pressing
SELECT
.
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record ap-
pears.
Display Description
New Total
Line 1 xx xx
Line 2 xx xx
Shows the number of
new Caller ID records
(records you have not
reviewed) and the total
number of records for
each line.
Private Name
or Private
Number
The caller has blocked
the Caller ID informa-
tion from being sent.
Unknown Name
or Unknown
Number
The caller is not within
a Caller ID service
area.
Incomplete
Data
Appears if there was
an error during the
transmission of Caller
ID information. Minor
electrical distur-
bances can affect
Caller ID information.
Occasional errors are
normal. If the phone
frequently displays
Incomplete
Data
,
contact your local tele-
phone company or
RadioShack store for
assistance.
End of List
Appears when you
scroll past the oldest
Caller ID record.
Start of
List
Appears when you
scroll up past the new-
est Caller ID record.
No Call
There is no call on the
line you selected.
43-685.fm Page 29 Thursday, July 8, 1999 7:50 AM