Filter
Top Products
20
3. Once you have the second party on
the line, press
CONFERENCE
(
CONF/DELETE
on the handset) to
bring in the first party. Both line indi-
cators on the base light green. The
handset display shows
(Confer-
ence)
above
Line
1
Line
2
if
you are making a conference call
using the handset, or
(Conf
Base)
and
Line
1
Line
2
if you
are using the speakerphone for con-
ferencing.
4. To end the conference call, press
one line button, then the other. If you
want to hang up one line and con-
tinue talking on the other, press the
line button you want to hang up.
If you want to talk on one line with-
out disconnecting the other, press
HOLD
or
HOLD/CANCEL
, then the
button for the line you want to talk
on. To return to a 3-way conversa-
tion, press
CONFERENCE
or
CONF/
DELETE
.
4-Way Conferencing
Follow these steps to use both lines and
the ET-685’s intercom function to set up
a four-way call (see “Using the Paging/
Intercom Features” on Page 22).
1. Make a 3-way conference call. (See
“3-Way Conferencing” on Page 19.)
2. Press
INTCM/PAUSE
on the handset
or
INTERCOM
on the base to page
the other keypad.
The two outside lines are automati-
cally put on hold, but the parties on
both lines can talk with each other.
3. To answer the page press
INTCM/
PAUSE
on the handset, or
INTER-
COM
on the base, then press
CONF/
DELETE
on the handset or
CONFER-
ENCE
on the base.
To end the conference call, press
LINE 1
and
LINE 2
on one keypad,
then press
LINE 2
on the other key-
pad.
If you want to hang up one line and
continue talking on the other, press
the line button that you want to hang
up.
Note:
You can also make a conference
call using both the ET-685 and an exten-
sion phone. (See “Using the ET-685 with
Extension Phones” on Page 21.)
CONFERENCE
CONF/DELETE
INTERCOM
INTCM/PAUSE
43-685.fm Page 20 Thursday, July 8, 1999 7:50 AM