Filter
Top Products
28
CALLER ID OPERATION (HANDSET ONLY)
If you subscribe to Caller ID service from
your phone company, the phone compa-
ny sends information about the call, as
well as the time and date, between the
first and second rings of every call you
receive. Although the Caller ID memory
is on the handset, it records the call you
receive on the speakerphone also.
The ET-685 displays this information
when it receives a call, and it stores up
to 80 Caller ID records — 40 each for
both lines — for later review. It also
shows if caller information is unavailable
or if the name and number were blocked
by the caller (see “Caller ID Messages”
on Page 29).
If you subscribe to Call Waiting with
Caller ID, you will hear a tone through
the handset when a call comes in, then
the Caller ID record appears. If you want
to answer the incoming call, press
FLASH/REDIAL
. To resume the previous
phone conversation, press
FLASH/RE-
DAIL
again.
If the ET-685’s Caller ID memory be-
comes full, any new call replaces the
oldest call’s record.
REVIEWING CALLER ID
RECORDS
To review the Caller ID records, lift the
handset if necessary and press
CALLER
ID
. Numbers of new and total numbers
of Caller ID records for each line appear.
Press or to select the line you want
to view, then press
SELECT
.
Note:
If the handset is faceup on the
base, it shows the number of Caller ID
records, so you can see if you have new
records to review.
Repeatedly press to scroll through the
Caller ID records from the newest to the
oldest, or to scroll back through the
records. To scroll quickly through the
records, hold down or .
When you scroll past the last record,
End
of
List
appears. When you
scroll past the first record,
Start
of
List
appears.
The top line of each record shows the
date, time and the number of calls from
that number. The second line shows the
caller’s name, and the third line shows
the caller’s phone number.
To exit the Caller ID record display,
press
HOLD/CANCEL
.
43-685.fm Page 28 Thursday, July 8, 1999 7:50 AM