Radio Shack ET-685 Cordless Telephone User Manual


 
23
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset (available at your local
RadioShack store) that has a
3
/
32
-inch
plug.
To connect the headset, pull open the
rubber cover marked on the side of
the handset, then insert the
3
/
32
-inch plug
into the jack.
Notes:
Connecting a headset disconnects
the handset’s earpiece and micro-
phone, but it does not affect the ET-
685’s speakerphone.
VOL
on the handset also controls
the connected headset’s volume.
If you place the handset on the base
facedown to recharge it while the
headset is connected, be sure the
handset seats properly.
With a headset connected, you make or
answer calls as usual, using the keys on
the handset.
You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for great-
er convenience.
When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.
43-685.fm Page 23 Thursday, July 8, 1999 7:50 AM