Filter
Top Products
Expanding Your Phone
45
2. Press the ENTER soft key to enter
DirectLink mode. You will hear a
confirmation tone, and
DirectLink
Mode Complete
appears.
3. Press the
DirectLink soft key.
4. Select the handset to which you wish to
DirectLink with by pressing the number
keys (
1-9, 0). Your handset will then
page the other handset.
5. On the receiving handset, press
talk/FLASH, the ANSWER soft key or if
Anykey Answer is on, press any
number key,
*
/tone/< or #/>.
6. When you finish your conversation,
press end or the END soft key on either
handset. Return the handset to the
cradle, or press the CANCEL soft key
and then the
OK soft key to return to
normal standby mode. (cancelling
DirectLink mode).
INTERCOM/CALL TRANSFER
FEATURE
You can use handsets as an intercom. Also,
you can place an outside call on hold and
transfer the call to another handset. Ô
Intercom
1. Press INTCM/HOLD in standby mode.
2. Select the handset you want to talk with
from the selection list within 30
seconds. To select the handset, press
VOL/RING/ or VOL/RING/ , and then
press the
OK soft key. If you select
All
,
all handsets will be paged. An intercom
tone sounds.
Ô NOTES Ô
• If the party is busy or out
of range, the handset
returns to standby mode.
• If any of the following
occurs while selecting
the other handset, the
operation will be
cancelled.
- talk/FLASH or
SPEAKER is pressed.
- An outside call,
intercom or page is
received.
• When the party does not
answer within one
minute, the operation is
cancelled.