Filter
Top Products
Expanding Your Phone
44
REGISTER THE HANDSET TO
THE
BASE
If you purchase an extra handset, you need
to register the handset to the base before
use. Only one handset can be registered at
a time. Ô
Handsets supplied with the phone are
registered to the base by the factory.
Handsets that have not been registered
display
Place handset on main base
to register
. When you register an extra
handset to the base, follow the steps below.
1. Before registering the extra handset,
the battery pack MUST be charged for
15-20 hours.
2. Place the extra handset in the main
base unit to begin registration.
3. While the handset is registering,
Handset Registering
will appear
in the LCD.
When
Registration Complete
is
displayed, the handset has been
registered to the base. If
Registration Failed
appears,
remove the handset from the base and
try again.
USING THE DIRECTLINK
MODE
To use this feature, you must enter the two
handsets into the DirectLink mode first. Ô
DirectLink call
1. Press the MENU soft key and select the
DirectLink Mode menu.
To enter
DirectLink mode press
[ENTER]
appears.
Ô NOTES Ô
• All of the handsets ring
when a call is received.
• An extra handset can be
registered when the
main base is in standby
mode.
Ô NOTE Ô
Handsets can be in Direct
Link mode while other
handsets are in use.