Filter
Top Products
Making and Receiving Calls
30
USING ONE TOUCH VOICE
MAIL ACCESS
If you subscribe to voice mail service, you
can use your phone to access your voice
mailbox. The new message LED flashes
whenever you have messages waiting in
your voice mailbox.
Just program the handset with your access
number, and you can get your messages at
the touch of a key on the handset.
The voice mail service provider will supply
you with the access number. This number
may be simply a phone number. Refer to
the provider’s literature.
To program or delete your Voice Mail
Access Number, See page 17.
Dialing your Voice Mail Service
Once you’ve programmed your personal
access number, you can dial your mailbox
with the touch of a key. When you have
messages, simply press the soft key.
If you have not entered the access number
or it has been deleted, when you press the
soft key,
No Number Stored To
store number press [MENU]
appears
and you will hear a beep. The phone returns
to standby mode.
Resetting the New Message LED
The LED flashes when you have new
messages in the voice mail service. If the
LED remains on after you’ve retrieved your
messages, you may need to reset the
indicators. With the phone is in standby
mode, press and hold
PAGE on the base
until the paging sound stops (about 5
seconds).
Ô NOTEÔ
You must subscribe to
voice mail service from your
telephone company in order
to use this feature. The
voice mail service company
will provide you with the
access number.