Filter
Top Products
Setting Menu Options
17
Room/Baby Monitor
This feature allows you to monitor sounds in
another room. Place the handset in the
room you wish to monitor; it will function as
a microphone. A second handset can be set
to function as a remote speaker, allowing
you to monitor sounds in the room. Ô
Using Room/Baby Monitor
1. Press the MENU soft key and select the
Room Monitor menu.
To Room
Monitor
appears.
2. Select the handset you want to monitor
by using
VOL/RING/ or VOL/RING/ .
3. Press the OK soft key.
RoomMonitor
appears, and you hear
sounds in the room where the handset
is installed.
4. To turn off the Room Monitor, press the
END soft key, or end.
Handset Setup
The following submenu options must be set
separately for each handset.
Programming your Voice Mail
Access Number
1. Press the MENU soft key. Select the
Handset Setup menu, and then the Edit
Voice Mail submenu.
Edit V_mail
No.
appears.
2. Enter your personal access number
using the number keypad (
0-9),
*
/tone/<, #/>, the DELETE soft key, or
the PAUSE soft key (up to 20 digits).
3. Press the OK soft key. You will hear the
confirmation tone.
To delete the current Voice Mail Access
Number, delete all numbers in Step 2 using
the
DELETE soft key and the OK soft key.
Ô NOTE Ô
This feature only works
when the handset(s) is
within the range of the
base.