Filter
Top Products
Installation
10
4. Plug the telephone line cord into the
telephone outlet.
5. For a wall plate,
align the base’s
keyhole slots
with the wall
plate studs and
slide the base
downward to secure it.
For direct wall
mounting, align
the base’s
keyhole slots with
the mounting
screws and slide
the base downward to secure it.
CONNECTING/CHARGING THE
BATTERY PACK
The phone comes with a rechargeable
nickel-metal hydride (Ni-MH) battery pack.
Before using your phone, you must charge it
for about 15–20 hours.
1. Press down and slide off the battery
compartment cover.
2. Lift the battery pack out of the
compartment.
3. Plug the battery pack’s connector into
the socket in the compartment (the
connector fits only one way), then place
the battery pack in the compartment.
4. Replace the cover.
To charge the battery pack, place the
handset on the base. The
CHARGE indicator
on the base lights.
Recharge the battery pack when
Low Battery
flashes on the display.
To remove, push up
a tab on the wall
mount adapter as
shown.