Filter
Top Products
Additional Information
42
ADDITIONAL
INFORMATION
INSTALLING THE OPTIONAL
BELTCLIP
To attach the beltclip
Insert the beltclip into the holes on each side of the
handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs
from the holes.
HEADSET INSTALLATION
You can connect an optional headset with a
3
/32-
inch (2.5-mm) plug. Contact RadioShack for a
suitable headset.
To connect the headset, open the rubber cover on
the side of the handset, then insert the headset’s
plug into the jack.
When you finish using the headset, disconnect it
from the handset and close the rubber cover to
protect the jack.
43-3827/3870.FM Page 42 Monday, June 2, 2003 11:02 AM