Radio Shack 43-324 Cordless Telephone User Manual


 
38
Additional Info
Specifications
Frequency control
Crystal controlled PLL synthesizer
Transmit frequency
Handset: 5857.20-5865.90 MHz
Telephone base: 912.75-917.10MHz
Channels
30
Nominal effective range
Maximum power allowed by FCC and IC.
Actual operating range may vary according to
environmental conditions at the time of use.
Size
Handset: 7.32in X 2.01in X 1.57in
(186.0mm X 51.0mm X 40.0mm)
Telephone base: 4.33in X 5.34in X 3.78in
(110.0mm X 135.6mm X 96.0mm)
Weight
Handset: 5.14oz (145.6g) (including battery)
Telephone base: 5.26oz (149g)
Power requirements
Handset: 3.6V 400mAh Ni-Cd battery
Telephone base: 7.5V AC @ 200mA
Memory
Handset directory: 20 memory locations (9 speed
dial inclusive); up to 24 digits and
14 characters
Handset call log: 45 memory locations; up to 11
digits and 15 characters
FCC Information
This equipment has been tested and found to comply with the requirements
for a Class B digital device under Part 15 of the Federal Communications
Commission (FCC) rules. These requirements are intended to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures: