Filter
Top Products
10
Setup
Date and Time
If you subscribe to caller ID service, the date and time is set automatically
with the next incoming call. If you do not have caller ID service, you can set
the date and time manually.
1. Press PROG.
2. Press or until DATE/TIME is displayed. Press SELECT.
3. When the month is flashing, press or until the screen displays the
correct month and then press SELECT or PROGPROG.
4. When the date is flashing, press or until the screen displays the
correct date and then press SELECT or PROG..
5. When the hour is flashing, press or until the screen displays the
correct hour and then press SELECT or PROG..
6. When the minute is flashing, press or until the screen displays the
correct minute and then press SELECT or PROG..
7. When AM or PM is flashing, press or to choose between AM or
PM and then press SELECT or PROG.. You will hear a confirmation tone.
n Note: When there is a power failure, the time may need to be reset.
Ringer
You can select from different ringers.
1. Press PROG.
2. Press or until the screen displays RINGER: and the current setting.
3. Press SELECT. The current setting flashes, and you will hear a sample of
the ringer.
4. Press or to select RINGER: 1, 2, 3, or 4. You will hear a sample of
each ring tone.
5. Press SELECT or PROG to confirm. You will hear a confirmation tone.