Filter
Top Products
6
Setup
Battery Installation and Charging
Install the battery as shown below. The battery may have enough charge for
short calls. For best performance, charge the battery for at least 16 hours
before first use. Completely charge and drain the battery two or three
times every three months afterwards. When the battery power is low, LOW
BATTERY is displayed and flashes on the handset screen.
1. Insert the plug of the battery as indicated. Make sure it is plugged
securely and matches the color-coded label inside the battery
compartment.
2. Place the battery with the label THIS SIDE UP facing up, and the wires
inside the battery compartment.
3. Align the battery compartment cover flat against the battery
compartment, then slide it upwards until it clicks into place.
4. Charge the handset by placing it in the telephone base. The handset
charge light is on when charging.
n Note: If the handset will not be used for a long period of time, remove
the battery to prevent possible leakage.
Match color
code label
Red wire
Black wire