Radio Shack 43-324 Cordless Telephone User Manual


 
20
Speed Dial
Speed Dial
Your telephone can store up to nine telephone numbers with names (up
to 14 characters and 24 digits in each location) in the speed dial memory
locations you assign in the handset.
Store a Speed Dial Entry
1. Press PROG and then press or until the screen displays SPEED
DIAL.
2. Press SELECT. The screen displays ENTER 1-9.
3. Press a key (1 through 9) to assign the speed dial location to store this
number. The screen displays ENTER NAME.
4. Use the dial pad keys to enter the name (see “Character Chart” on page
17) and then press SELECT or PROG.
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a character.
5. The screen displays ENTER NUMBER.
6. Use the dial pad keys to enter the telephone number, and then press
SELECT or PROG.
Press to move the cursor to the left or to the right.
Press CHAN/REMOVE to erase a digit.
7. Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
8. The screen displays DISTINCT RING? and the current setting.
8. Press or to choose Y (yes) to customize this entry, or choose N (no)
for a normal ringer. If you choose Y, will be displayed with the entry.
9. Press SELECT or PROG to confirm. You will hear a confirmation tone.
n Notes:
The entries stored in the speed dial memory will be numbered 01
through 09 and share the memory in the directory.
Press OFF at any time to exit speed dial mode.
If the location is not empty, the new entry will replace the old entry and
the old entry will be moved to a directory location.