Filter
Top Products
12
Setup
Home Area Code
If you dial your local calls using only seven digits (area code not required),
you can program your home area code, following the steps below. By
programming your home area code, when you receive a call within your
local area, the telephone number is automatically stored without the area
code in the call log.
1. Press PROG.
2. Press or until the screen displays HOME AREA CODE.
3. Press SELECT. The stored area code is displayed with the first digit
flashing.
4. Use the dial key pad to enter the desired home area code.
5. Press SELECT or PROG to confirm. You will hear a confirmation tone.
n Notes:
• If your phone service provider requires you to dial the area code when
making a local call, or you want to cancel the home area code you have
already programmed, reprogram your home area code to 000.
• Press CHAN/REMOVE when in the home area code menu to delete
the stored home area code. ___ is then displayed.
Language
1. Press PROG.
2. Press or until LANGUAGE is displayed.
3. Press SELECT. The current setting flashes.
4. Press or until the screen displays the desired language (ENGLISH,
ESPANOL or FRANCAIS).
5. Press SELECT or PROG to confirm. You will hear a confirmation tone.
Clear Voicemail
If you subscribe to voicemail services provided by your telephone
company, NEW VOICEMAIL and are displayed on the handset and
the VOICEMAIL light on the telephone base flashes when you have a new
voicemail message.