Filter
Top Products
9
Installation
10"#"9#.."2.#6'"
14"9#..
To mount the phone directly on a wall, you need two
screws (not supplied) with heads that fit into the
keyhole slots on the base. Drill two holes 3
15
/
16
inches apart. Thread a screw into each hole, letting
the heads extend about
1
/
8
inch.
1. Plug one end of the supplied modular cord
(short for a wall plate, long for direct wall
mounting) into the
TEL LINE jack on the base’s
back.
2. Insert the supplied AC adapter’s barrel plug
into the DC IN 9V jack.
3. Route the adapter and modular cords through
the base’s grooves.
4.
For a wall plate
,
plug the modular
cord’s other end
into the wall plate
jack, then align the
base’s keyhole
slots with the wall
plate studs and
slide the base
downward to
secure it.
For direct wall
mounting
, align the
base’s keyhole
slots with the
mounting screws
and slide the base
downward to
secure it.
5. Plug the adapter
into a standard AC
outlet.
TEL LINE
DC IN 9V
43-3821.fm Page 9 Friday, May 10, 2002 10:08 AM