Filter
Top Products
22
Answering System Operation
To start recording a phone conversation, press
MEMO on the base until the answering system beeps
and
##
####
## appears. As it records the conversation, the
system beeps to indicate the conversation is being
recorded. To stop recording, press
PLAY/STOP or
MEMO. The system stores a recorded conversation
as a message (see “Playing Messages”).
2.#;+0)"/'55#)'5
After the answering system has recorded a
message, its message counter shows the total
number of messages stored. If you have new
messages, the number of new messages flash. To
play your messages, press PLAY/STOP. The system
announces the number of new and old messages,
then plays the new messages. The message
number appears as each message plays, and the
system announces the day and time of the call at
the end of each message.
To play all messages after playing the new
messages,
press PLAY/STOP again.
To skip to the next message,
press
7
|
while the
message is playing. Hold down
7
|
to quickly
advance through a message. The system advances
through the message at double speed until the end
of the last message. Release
7
|
to resume normal
playback.
To replay the current message from the beginning
,
press
|
6
. Hold down
|
6
to review the current
message. The system skips back every other
second of playback and plays the previous second,
until the beginning of the message. Release
|
6
to
resume normal playback.
To replay the previous message
, press
|
6
within
about 2 seconds (4 seconds during remote operation)
after a message begins playing. If the current
message is the first new message, the system plays
back from the beginning of the current message (it
does not go back into the old message group).
43-3821.fm Page 22 Friday, May 10, 2002 10:08 AM