Filter
Top Products
17
Answering System Operation
5'66+0)"6*'"&#;16+/'
You must set the day and time so the system can
record the correct day and time of each message.
±ý
1. Press
MENU once. The system announces
“Time,” then the currently set time, day, and the
day’s number (
'
''
' for Sunday, (
((
( for Monday, and
so on) appear.
2. Repeatedly press
7
|
on the base to move
forward or
|
6
to move backward until the
correct day appears, then press
SET/RING. The
system announces and displays the hour.
3. Repeatedly press
|
6
or
7
|
until the correct
hour appears, then press
SET/RING. The
system announces and displays the minutes.
4. Repeatedly press
|
6
or
7
|
until the correct
minutes appear, then press
SET/RING. The
system announces “AM” or “PM,” and
7
77
7 or F
FF
F
appears.
5. Press
|
6
or
7
|
to choose AM or PM, then
press
SET/RING. The system beeps and
announces “Time” then announces the
currently set day and time.
To check the day and time, press MENU once. The
system announces the currently set day and time.
5'66+0)"6*'"07/$'4"1("4+0)5
You can select how long the system waits to
answer a call — 2, 4, or 6 rings, or toll-saver. If you
plan to check messages by long distance, set the
ring time to toll-saver (see “Using the Toll-Saver” on
Page 24).
1. Press
MENU three times. The system
announces “Ring time” followed by the current
setting. The current setting — (
((
(, *
**
*, ,
,,
,, or jI
jIjI
jI (toll
saver) — displays.
±
"016'"
±
"
• Enter each key press
within about 2 minutes.
Otherwise, the system
exits the time setting
process and you must
begin again with Step 1.
• If power fails, the clock
retains the current time.
When the power is
restored, it starts
counting again from the
time the power failed.
43-3821.fm Page 17 Friday, May 10, 2002 10:08 AM