Filter
Top Products
SoundStation2 Direct Connect User Guide - 9
Ready State
SoundStation2 Direct Connect will dis-
play a Ready message upon power up and
completion of initialization.
The Ready message is also shown after a
call is completed and the phone is avail-
able for the next call.
BEREIT
WIEDERW.
TEL.BUCH
KURZWAHL
5551212
READY
REDIAL
PH BOOKSP DIAL
5551212
PREPARADO
RELLAMAR
DIR TELMARC RÁP
5551212
PRÊT
RECOMP
ANNUAIREABRÉGÉ
5551212
PRONTO
RISEL.
RUBRICAN. ABBR.
5551212
KLAR
NY OPPR
TLFLIST
EHURTIGNR
5551212
PRONTO
REDISCAR
LIST TE
LDISC RAP
5551212
English
German
Spanish
Fr
ench
Italian
Norw
egian
Po
rtuguese
(Brazilian)
3. Plug the other end into the slot
under the SoundStation
2 Console
as illustrated.
Then thread the
cable through the channels on the
underside of the console as shown
at right.
4. Plug the Power Adapter Cable
into the Interface Module jack
marked then plug the Power
Adapter into the electrical outlet.
► The first time the SoundStation2
Direct Connect is powered up and
connected to the network through
the Interface Module, it will run
a brief self-test and synchronize
itself with your telephone network.
During this time the LEDs will
blink. When the process is com-
plete you will hear a tone and the
LEDs will switch off. This process
can take 20 seconds.
The SoundStation2 Direct Connect is
designed for greater room coverage
with extended microphones.
► If using the optional extension
microphones, connect to
SoundStation2 as shown at
right.
Place the SoundStation2 Direct
Connect on a flat, stable surface in the
center of the room.
► If using the extended hypercar-
diod microphones, for the best
coverage, position as shown in
the examples to the right.
MIC 1
MIC 3MIC 2
MIC 4 MIC 5