Filter
Top Products
SoundStation2 Direct Connect Administrator Guide - 32
among all frequencies within a
band of interest, which for the
SoundStation2 Direct Connect
is approximately from 300 to
3,400 Hertz.
3. Press the Select button to acti-
vate the signal.
Restore Defaults
Restoring the defaults will irretrievably
remove all settings and data that have been
entered since the SoundStation2 Direct
Connect was first installed.
1. Press the Menu button ,
choose Admin Setup and press
the Select button , enter
passcode (if required) and press
the ENTER soft key. Choose
Diagnostics using the Scroll-
ing buttons , and press the
Select button .
2. Choose Restore Defaults using
the Scrolling buttons
, and
press the Select button .
Press the OK soft key if you wish
to restore defaults or the CANCEL
soft key or the Exit button
to return to the Diagnostics
submenu.
Phone Book entries and Speed Dial
numbers are lost when restoring all
defaults.