Filter
Top Products
SoundStation2 Direct Connect User Guide - 21
1. Connect an external recording
device, such as a cassette tape re-
corder, via the auxiliary jack on the
interface module. The auxiliary
jack is marked AUX I/O.
2. Press the Menu button and
choose Settings.
3. Choose Aux Audio and press
the Select button . Cycle
through the options using the
Scrolling button .
4. Press the SAVE soft key or Select
button to save the setting.
The setting for auxiliary audio needs to
match the kind of device that is being
connected to the phone.
► Wireless Mic = audio will be re-
ceived from a wireless microphone
device.
► Record Out = all audio will be sent
to an audio recording device.
► Ext Speaker = audio will be sent to
a connected external speaker.
Auxiliary Audio Port
SoundStation2 Direct Connect offers an auxiliary audio
port that allows external devices to connect to the confer-
ence phone.
A typical example is to record conference call audio by
connecting an external recording device.
AUX I/O
Using the Meridian Phone
When the SoundStation2 Direct Connect is
not in use you may use the Meridian phone
(connected to the Interface Module) and it
will function as usual.
Answering a call on the Meridian Phone:
Incoming calls will ring on both
the Meridian phone and the
SoundStation2 Direct Connect. If
you answer the call on the Meridian
phone and want to transfer it to the
conference phone, simply press ON/
OFF on the conference phone and
hang up the handset. The LED's will