SoundStation2 Direct Connect User Guide - 24
Short Silences, Echoes, or Clipped Speech
► Do not move the SoundStation2
Direct Connect console while it
is in use.
► Keep your hands away from the
console during calls.
► To avoid excessive noise around
SoundStation2 Direct Connect,
keep papers, cups, and other
noise-producers away from the
console.
► At the beginning of each call,
let someone at each location
speak in turn for a few moments
to enable SoundStation2 Direct
Connect to adapt to its environ-
ment.
► The other parties may be using
non-Polycom equipment which
may cause audio performance
issues.
► Try calling again; a different
line may provide a better con-
nection.
Physical Damage
► If physical damage is severe
enough that the internal parts
become visible, disconnect the
SoundStation2 Direct Connect
immediately.
► Do not reconnect to the
telephone network until the
SoundStation2 Direct Connect
has been repaired.
For Best Performance
Your SoundStation2 Direct Connect performs optimally
when you follow these guidelines:
► Position the SoundStation2
Direct Connect in the center of
the conference table or desk.
► Do not move the SoundStation2
Direct Connect during a call.
► Do not shuffle papers near the
SoundStation2 Direct Connect.
►Position extended microphones
7’ from the SoundStation2
Direct Connect console.
► Speak at a normal conversa-
tion level, and direct your voice
towards the SoundStation2
Direct Connect, or towards the
extended microphone.
► Unplug all cords before clean-
ing the SoundStation2 Direct
Connect. Do not use liquid
cleaners or aerosol cleaners.
Use a damp, soft cloth for
cleaning.