Filter
Top Products
SoundStation2 Direct Connect User Guide - 17
OR
1. Press the HOLD soft key to place
the first call on hold.
2. Press the Conference button
and enter the number you
wish to call. You may use the
Redial or Direct Dial method.
Programming the Bridge number:
Bridge Soft Key
You may program the telephone number of
your preferred audio conferencing bridge or
service into the SoundStation2 Direct Con-
nect so that it is immediately available.
1. Press the Menu button
,
choose Bridge Setup using the
Scrolling buttons, and press
the Select button .
2. Choose Enter Phone Number and
press the Select button and
then enter the bridge number using
the dial pad. Enter any necessary
prefix such as 9 and/or 1.
► If you make a mistake entering the
number, use the <DEL soft key to
correct the error.
3. Press the
SAVE soft key or CANCEL
soft key
if you wish to cancel the
procedure.
The SPEED DIAL soft key will not
display when the bridge number
is configured.
SETTINGS
PHONE BOOK
THIS PHONE
BRIDGE SETUP
ENTER PHONE NUMBER
EDIT SOFT KEY
BRIDGE SETUP
Conferencing features, including
the number of parties that can be
conferenced vary by ECS/Meridian
system.
Check with your System
Administrator if you are unsure about
the conferencing services provided.
Transfer a Call
To transfer a call, press the Transfer
soft key. At the dial tone, dial the
extension to which the call is being
transferred. Press the Transfer soft
key again to complete the transfer,
either when you hear ringing or after
talking privately with the person to
whom the call is being transferred.
To cancel a transfer attempt press the
CANCEL soft key, instead of the second
Transfer press, anytime during the
attempt.
Since the conference phone is a single
line phone, all conferenced parties will be
transferred when this function is used.