Filter
Top Products
Polycom
®
SoundStation
®
IP 5000 Phone User Guide
38
About Your User Password
You are assigned a user password so you can answer calls from your locked
phone and unlock the phone. By default, your user password is 123. You can
change your user password at any time.
To change your user password:
1. From the idle screen, press , and then select Settings > Advanced.
2. From the Password screen, enter your user password, and then press the
Enter soft key.
3. From the Advanced screen, select Change User Password.
4. From the Change User Password screen, enter your password
information, and press the Enter soft key.
Locking and Unlocking Your Phone
You can choose how you want your phone to handle incoming calls when it is
locked. If you set up your phone to allow incoming calls when it is locked (the
default setting), incoming calls will ring on your phone, and you can answer
calls by entering your user password. If you set up your phone to ignore
incoming calls, Do Not Disturb will be applied to all lines on your phone, and
your phone won’t ring.
To lock your phone:
1. On the idle screen, press , and then select Settings > Basic >
Lock Phone.
2. From the Lock Phone screen, select how you want incoming calls handled
when your phone is locked.
— Allow ringing when locked—Select this option if you want your
phone to ring when you have an incoming call. If you choose this
option, you can answer a call by entering your password.
— DND when locked—Select this option if you don’t want your phone
to ring. You won’t have the option to answer incoming calls. All
incoming calls will go to your voicemail system (if enabled) and
display in your Missed Calls list. Note that enabling this option on
shared lines disables ringing only. You will still see a visual
notification of the call and have the option to answer it.
The default setting is Allow ringing when locked.
3. Press the Lock soft key.
Your phone is locked.