Filter
Top Products
Using the SIP Handset
PN: 1725-36034-001_B.doc 67
If you want to… Then…
Place a call on hold
Press the Hold softkey.
When a call is placed on hold, an equal character (=) replaces the asterisk
(*) and the Rsme softkey replaces the Hold softkey. Press Rsme to return to
the call.
Example:
1
Line 1 [your dial number]
=Fr: [caller ID]
Rsme Mute End
Mute/Unmute a call
Press the Mute softkey. When the handset is muted, an x character replaces
the asterisk (*). Press the Mute softkey again to restore audio pickup.
Silence the ring
Press the END key to silence the loud ring and convert it to in-ear ringing.
Loud ringing will resume when the next incoming call is received while the
handset is in standby mode.
Answer a call on a
second line
If another call comes in on a different line, the called line icon flashes and a
tone sounds in the audio stream. In this example, a call is coming in on line
2 and the line 2 icon is flashing.
Example:
1 2
Line 1 [your dial number]
*Fr: [caller ID]
Hold Mute End
20 To view the caller ID of the incoming call without interrupting the active
call, press LINE + [the line number]. The display now shows information
about the incoming call and you will continue hearing audio on the first
call.
Example:
1 2
Line 2 [your dial number]
Fr: [caller ID]
Answ Rej
21 Press Answ or START to answer the incoming call and place the active
call on the other line on hold. Pressing the Rej softkey will redirect the
incoming call to voicemail or as otherwise programmed.