Filter
Top Products
Programming the SIP Handset Features
PN: 1725-36034-001_B.doc 53
# Linux, the OS running Asterisk, has a ARP Cache flushing mechanism. This
# feature serves to refresh the ARP Cache for the 8002 phones. For 8020 and
# 8030 phones, the ARP Cache is refreshed by the SVP server. 8020/8030
# phones do not know how to parse this parameter.
#
# The value of this parameter for 8002 phones should be just less than the
# minimum ARP Cache flushing time on the Linux box running Asterisk. For
# Redhat this minimum flushing time is 15 seconds, so the parameter needs to
# be set for 14 seconds or less. For other Linux Distributions, you may
# have to determine what this minimum value is, however 14 seconds should
# work fine.
#
# The lower this setting, the more the impact on the 8002's standby battery
# life.(8002 phones running version 130.003 and earlier code ignore this
# parameter if present)
# (8020/8030 phones ignore this parameter if present no matter the SW
# version)
PROXY1_KEEPALIVE_SECS=14
# PROXYn_REREG_SECS specifies the re-registration interval for a PROXY.
# This is the requested expiration interval sent in the REGISTER request
# message. It can be set to anything between 35 and 3600 seconds.
# The default value (which is applied if no parameter is supplied in this
# file) is 3600 which means the phone will attempt to register every 3580
# seconds, if the server's response interval doesn't take precedence (see
# below).
#
# If the server has a lower maximum setting or a higher minimum setting that
# this value then the server's response will take precedence and this
# parameter will be ignored.
#
# The phone will always attempt to re-register with the PROXY 20 seconds
# prior to the expiration interval. Thus, if this parameter is set to 35
# seconds, and the server's response interval doesn't take precedence, then
# the phone will attempt to re-register every 15 seconds.
#
# The lower this setting, the more the impact on the 8002's standby battery
# life.
# (8002 phones running version 130.003 and earlier code ignore this
# parameter if present)
#(8020/8030 phones ignore this parameter if present no matter the SW version)
PROXY1_REREG_SECS=3600
# Favorites in the allusers file will be present in the favorites on all
# handsets
# The username can be blank and can include escaped chars
# Useful features can be included such as call forwarding or dialing
# voicemail
# FAVORITE = dial_string; username
FAVORITE = 1234; Site Security
FAVORITE = *98; Call Forwarding