Filter
Top Products
SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
26 PN: 1725-36034-001_B.doc
Phone Config
License Option
The License Option indicates the VoIP protocol that your site is
licensed to download and run. The SIP protocol used for the
SpectraLink 8002 Wireless Telephones requires license option
selection
22.Any other protocol will cause the handset to malfunction.
SIP Registration
Individual handsets can be configured to correspond with a handset-
specific configuration file in the TFTP server. The handset is then
automatically identified at startup.
If the username and password information is not configured in the
Admin menu, then this information will be requested at startup. The
username and password entered must agree with a corresponding
handset-specific configuration file. See Chapter 4 Programming the SIP
Handset, section SIP TFTP Server Configuration Files.
Reg 1 and Login allows you to specify a username and password for
automatically acquiring SIP configuration information. If no
username is specified, the SIP handset will request username and
password at startup and any additional registrations specified here
are ignored.
The username should correspond to the primary (line 1) dial number
assigned to the user. The username and password should also
correspond to the authentication credentials as created by your
system administrator for your primary line registration. Usernames or
passwords can be erased by selecting the item, then pressing
Bksp
softkey and then
Save softkey.
Reg 2, Reg 3, and Reg 4 allow you to specify additional authentication
usernames and passwords that may be required by your handset for
any additional line appearances (registrations) that may appear in the
specific user’s configuration file. This information will be ignored if a
Reg 1 and Login username is not provided.
OAI On/Off
SpectraLink’s Open Application Interface (OAI) enables third-party
computer applications to display alphanumeric messages on the