Filter
Top Products
REGULATORY NOTICE
The radiated output power of this internal
wireless radio is far below the FCC radio frequency
exposure limits. Nevertheless, the wireless radio
shall be used as described in the manual.
The internal wireless radio operates within
guidelines found in radio frequency safety
standards andrecommendations, which reflect
the consensus of the scientific community.
Plantronics therefore believes the internal
wireless radio is safe for use by consumers.
The level of energy emitted is far less than the
electromagnetic energy emitted by wireless
devices such as mobile phones. However, the
use of wireless radios may be restricted in some
situations or environments, such as aboard
airplanes. If you are unsure of restrictions, you
are encouraged to ask for authorization before
turning on the wireless radio.
NOTE: Modifications not expressly approved by
Plantronics, Inc. could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference; and
2.This device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
INDUSTRY CANADA NOTICE
EXPOSURE TO RADIO
FREQUENCY RADIATION
FCC REGISTRATION INFORMATION
AVIS INDUSTRIE CANADA
Radio Equipment
The term “IC:” before the radio certification
number only signifies that Industry Canada
technical specifications were met.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device. “Privacy of communications
may not be ensured when using this telephone.”
This product meets the applicable Industry
Canada technical specifications of the RSS210.
Équipement radio
Le terme « IC/CI »avant le numéro d’homologation
radio signifie seulement que les spécifications
techniques Industrie Canada ont été respectées.
Le fonctionnement de l’équipement est soumis aux
deux conditions suivantes : (1) le dispositif ne doit
créer aucune interférence nuisible, et (2) le
dispositif doit accepter toute interférence reçue, y
compris celles pouvant causer le fonctionnement
indésirable du dispositif. « La confidentialité des
communications n’est pas assurée lors de l’usage
du téléphone. »
Ce produit répond aux spécifications techniques du
ministère de l’Industrie du Canada en vigueur pour
le RSS210.
66283-01M2500QS 2/18/04 9:45 AM Page 17