Plantronics CT12 Cordless Telephone User Manual


 
7
BASICS
TIPS
RINGER TONE SETTING
Standby mode is
when the remote
is charged and
the Talk button
has not been
pressed. The
display is blank.
If you set the
ringer to Off, the
ringer tone will
not sound.
1) When the phone
is in the standby
mode, press
MENU/MUTE.
2) Press
or to
move the pointer
to “Ringer Tones”.
You can choose
from 6 ringers or
4 melodies:
Ringers [Flicker,
Clatter, Leap Frog, Ping Ball, Reminder,
Soft Alert]
Melodies [Beethoven 9, For Elise (Elise),
Merry Christmas (Merry-Xmas), Home
Sweet Home (Hm Swt Hm)]
3) You will hear the ringer or the melody
as you scroll through the options.
4) Press SELECT/CH and you will hear a
confirmation tone.
5) Press END to exit.
MAKING AND RECEIVING CALLS
To make or receive a call, you need to connect the Firefly™
headset to the remote unit. (See the Quick Start Guide.)
Put on the headset.
Remote On Base Remote Off Base
To answer Pick up the remote Press TALK/FLASH
and press TALK/FLASH OR
OR (AutoTalk) Press any
(AutoTalk) Pick up number key, /TONE,
the remote. or #.
To make 1) Pick up the remote. Dial the number, then
a call 2) Dial the number, then press TALK/FLASH.
press TALK/FLASH.
OR OR
1) Pick up the remote. 1) Press TALK/FLASH.
2) Press TALK/FLASH. 2) Listen for the dial tone.
3) Listen for the dial tone. 3) Dial the number.
4) Dial the number.
To hang up Press END, or return the remote to the base.
To enter When you dial the number, press
a pause PAUSE/REDIAL. “P” appears in the
within display which represents a pause.
the dialing
sequence
The headset LED will continue flashing during Talk Mode.
When you press DELETE during a call, the call will be placed
on hold and you will hear a ring tone. To resume the call, press
TALK/FLASH or DELETE. If the remote remains idle for 5 minutes,
the phone hangs up and returns to the Standby automatically.
6
NOTE: The
remote must be
out of the base
during calls.
Replacing the
remote will
cause the call
to disconnect.
CT11-12_020904 2/13/04 10:47 AM Page 6