Filter
Top Products
Tone Settings
This page defines the Tone settings. This function can setup the related parameters of Dial Tone, Ring
Back Tone, Busy Tone, Error Tone and Insert Tone. When you finished the setting, please click the
Submit button.
Advanced Settings
This page defines the advanced functions. When you finished the setting, please click the Submit
button.
ICMP Not Echo: This function can disable echo when someone ping this device, it can avoid haker try
to attack the device.
Send Anonymous CID: If enable this function, machine will to start the calling hidden function, and it
will not send the related Caller information. (The Registration Server also need
support this function)
Management from WAN: If enable this function, only WAN be able to connect to the management GUI
Send Flash event: There are provide two flash formats: DTMF Event and SIP Info.
Encryption Type: There are provide seven encrypt formats: INFINET, AVS, WALKERSUN1,
WALKERSUN2, CSF1, CSF2, GX and VGX. (The Registration Server also need support
this function)
Encryption Key: The encryption key is use to authentication data transmitted in the SIP network.
PPPoE retry period: If PPPoE dial-up connection fail, machine will retry the dial-up motion after this
time.
System Log Server: Machine could send the system logs to the specific Syslog Server. It can input the
IP or Domain address.
System Log Type: There are seven Syslog types: Call Statistics, General Debug, Call Statistics +
General Debug, SIP Debug, Call Statistics + SIP Debug, General Debug + SIP
Debug and All.
38