Filter
Top Products
41
En
07
Chapter 7
Advanced settings
Changing the settings
Operating the Initial Setup
screen
1 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
2 Select and set Initial Setup.
Use / to select, then press ENTER.
3 Select the item and change the setting.
Use /// to select, then press ENTER.
Closing the Initial Setup screen
Press HOME MENU or RETURN.
Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.
• In Options, the factory default settings are indicated in bold.
Setting Options Explanation
Display Setting
TV Screen 16:9 Full Select this when connecting to a wide (16:9) TV.
16:9 Normal Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Pan&Scan Select this when connecting to a conventional (4:3) TV.
4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
Video Adjust Brightness Select this to adjust the TV screen’s brightness .
Contrast Select this to adjust the TV screen’s contrast.
Hue Select this to adjust the color (green and red) balance of the TV screen.
Saturation Select this to adjust the TV screen’s saturation .
Sharpness High Choose the level of sharpness.
Middle
Low
Video Mode Standard Choose the video output mode.
Vivid
Cinema
Custom
Noise Reduction 0 Choose the level of noise reduction.
1
2
3
BDP-52FD_UCXCNSM_IBD_EN.book 41 ページ ２０１１年８月１９日 金曜日 午後１２時２３分