Filter
Top Products
21
En
02
Connecting components
to the USB port
The data downloaded with the BD-LIVE function and the
data used with the BONUSVIEW function when playing
BD-ROMs can be stored on a device connected to the
USB port (USB memory).
About USB memory devices
The USB memory devices that can be connected to the
player are as shown below.
• USB 2.0-compatible memory devices
• FAT16 or FAT32 file system, minimum 1 GB capacity
(2 GB or more recommended)
Note
• Devices formatted with a file system other than the
above cannot be used. Such devices may however be
usable if they are formatted from the player.
• USB memory devices may not be recognized if they
contain multiple partitions.
• Some USB memory devices may not operate with this
player.
• Operation of USB memory devices is not guaranteed.
Connecting the USB memory
device
Caution
• Be sure to turn the player’s power off before
connecting or disconnecting USB memory devices.
• Use empty USB memory devices (on which nothing is
stored).
• If the USB memory device is write-protected, be sure
to disable the write-protection.
• Placing excessive loads on the plug may result in
poor contact, making it impossible to write data on
the USB memory device.
• When a USB memory device is connected and the
player’s power is turned on, do not unplug the power
cord.
• USB external hard disks cannot be connected to the
player.
Note
• Devices may not work if connected to the USB port via
a memory card reader or USB hub.
USB memory device
Player’s front panel
USB memory device
Player’s rear panel
BDP-52FD_UCXCNSM_IBD_EN.book 21 ページ ２０１１年８月１９日 金曜日 午後１２時２３分