Filter
Top Products
31
EN
Set dialling mode (Tone/Pulse)
Dialling mode applies only when you are making a telephone call. Your phone is by default set to tone dialling.
You can switch to pulse dialling if necessary.
1. In idle mode, press .
2. Select ADVANCED SET and press OK.
3. Select DIAL MODE and press OK. The current setting is displayed.
4. Select TONE or PULSE and press OK to confirm.
Set display contrast
1. In idle mode, press .
2. Select PERSONAL SET and press OK.
3. Select
CONTRAST
and press
OK
. The current setting is displayed.
4. Press UP / DOWN to adjust the contrast and press OK to confirm.
Turning the backlit on/off
The LCD and keypad will be lit when the phone is being used.
1. In idle mode, press .
2. Select
PERSONAL SET
and press
OK
.
3. Select BACKLIT and press OK. The current backlit is displayed.
4. Select ON or OFF and press OK to confirm.
Temporary tone dialling in pulse dial mode
If the dialling mode is set to pulse, you can long press to set temporary tone dialling. d will be
displayed on the screen. All the following digits will be dialed as tones until you hang up.
Other features