Filter
Top Products
51
Advanced settings
1 Press m in idle mode, scroll n to
Advanced Set and press
o
Select
.
2 Scroll n to Reset and press
o
Select
.
3 Reset? is displayed on the screen.
Press
o
OK to confirm.
• A validation tone is emitted.
• The unit is reset to its default
settings. (See section 10.14
below.)
10.9 Set Area Code
This feature is useful when you have
subscribed to Caller Line Identification
service. It allows you to set an area code
in your phone. Once the local area code
is set, the phone automatically filters the
area code for all incoming calls, by
removing the area code for local calls and
retaining the area code for calls from
other areas.
If it is a local call, then only the phone
number of the caller is displayed during
an incoming call or when you call the
number from the call log. If it is a long
distance call, then both the area code and
phone number will be displayed in a
proper format to be dialed out directly
from the call log, or saved into the
phonebook.
You can enter 3 digits for the area code.
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log. See 7.1.4 “Call from the call log” for
details.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Scroll n to Area Code and press
o Select.
3 Area Code will appear in the
display. Input your area code and
press o OK to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
10.10 Set Auto Prefix
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
“Predialling” - section 7.1.1). You may
also use this feature to add a detect
string to match and replace the first few
digits of the number during predialing.
You can enter up to a maximum of 5
digits for the detect string and 10 digits
for the auto prefix number.
1 Press m in idle mode, scroll n to
Advanced Set and press
o
Select
.
2 Scroll n to Auto Prefix and press
o
Select
.
3 Detect Digit: is displayed on the
screen. Enter a detect string
number (maximum 5 digits) and
press
o
OK to confirm.
4 Prefix: is displayed on the screen.
Enter the prefix number (maximum
10 digits) and press
o
OK to
confirm.
Note