Philips SE455 Cordless Telephone User Manual


 
42
Use more of your phone
2 Scroll n to the handset number
you wish to transfer your external
call to and press o Select.
3 Press t on the called handset to
answer the internal call, where both
internal callers can talk.
Intercom is established.
4 Press h on the first handset to
transfer the external call to the
called handset.
The external call is transferred.
If there is no answer from the called
handset, press i to resume the
external call.
8.10.3 Answer an external call
during intercom
1 During intercom, a new call tone is
emitted when there is an incoming
external call.
2 Press h to exit intercom mode.
3 Press t to pick up the external
call.
8.10.4 Switch between an internal
and external call
During the call, press i to switch
between an internal or external call.
8.10.5 Establish a three-party
conference call
The conference call feature allows one
external call to be shared with two
handsets (in intercom). The three parties
can share the conversation and no
network subscription is required.
1 During the call, press i to put the
external call on hold (the caller can
no longer hear you).
The display shows the numbers
of the handsets registered to the
base.
2 Scroll n to the number of the
handset you wish to establish the
conference call with and press o
Select.
3 Press t on the called handset to
answer the internal call, where both
internal callers can talk.
Intercom is established.
4 Press c Conf. or long press i
on the first handset to start the
three-party conference.
Conference will be displayed on
the screen once the conference
call is established.
8.11 Handset locator
The handset locator feature enables you
to locate a missing handset if the handset
is in range and contains charged
batteries.
1 Press a on the base station.
All the registered handsets start
to ring.
Once a handset is found, press
c Silent on a handset to stop
its ringing.
2 Press a again to end the handset
locator.
If there are no key presses within 30
seconds, the handset will automatically
return to idle mode.
Note
Note