Filter
Top Products
41
Use more of your phone
8.9.3 Delete a call list entry
1 Press u in idle mode, and then
scroll n to select an entry and
select o Menu.
2 Scroll n to Delete and press o
Select.
3 Delete? is displayed on the screen.
4 Press o OK to confirm deletion.
• A validation tone is emitted, the
call list entry is deleted, and the
display goes to the next entry in
the call list.
Press c Back to discard the deletion.
The screen returns to the Call List
menu.
8.9.4 Delete all call list entries
1 Press u in idle mode, and then
press o Menu.
2 Scroll n to Delete All and press
o Select.
3 Delete All? is displayed on the
screen. Press o OK to confirm
deletion.
• A validation tone is emitted. The
display shows List Empty for 2
seconds and returns to the idle
mode.
8.10 Using the Intercom
Intercom and call transfer is only possible
when you have at least 2 handsets
registered to the same base station.
It allows you to make free internal calls,
transfer external calls from one handset
to another and use the conference option.
8.10.1 Intercom another handset
If the handset does not belong to SE450/
455 range, this function may not be
available.
1 Press i in idle mode.
• Intercom is established
immediately if there are only 2
registered handsets.
2 If there are more than 2 registered
handsets, scroll n to select the
handset to call and press o OK.
• Once the intercom call is
initiated the icon is displayed
on the handset.
3 Press t on the called handset.
• The intercom is established.
Pressing h on any handset will exit
intercom mode and return other
handsets to idle mode. If an external call
arrives during intercom mode and you
want to accept this call, you must first
exit intercom mode.
8.10.2 Transfer an external call to
another handset
1 During the call, press i to put the
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of the handsets registered to the
base.
Note
Warning
Note
Note