Filter
Top Products
36 Telephone answering machine (TAM)
Scroll
: to
ANSWER ONLY
or
ANSW.&RECORD
and press <
OK
.
• The answer mode is set.
Note
Depending on the answer mode you have
selected, the appropriate default outgoing
message is played once the answering
machine picks up an incoming call. The
language of the default outgoing message
depends on the country selected in
Welcome mode (see chapter 3.4).
9.6 Answering machine settings
9.6.1 Ring delay
This is the number of rings before the
answering machine answers and starts
playing your greeting message. You can
set the answering machine to start playing
your greeting message after 3 to 8 rings
or Economy. The default ring delay is
5
.
Press
m key in idle mode, scroll
: to
ANSW MACHINE
and press
<
OK
, scroll : to
SETTINGS
and
press
<
OK
, press <
OK
to enter
RING DELAY
.
Scroll
: to your desired ring delay
setting (
3
to
8
RINGS
or
ECONOMY
) and press <
OK
to
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Tip
Economy mode can save you the cost of a
long-distance call when you check your
messages remotely. If there are new
messages in your answering machine, the
outgoing message will start playing after 3
rings. If there are no new messages, the
outgoing message will be played after 5 rings.
9.6.2 Remote control access
If you are far away from home and want to
check the messages on your answering
machine, you can make use of the remote
access feature to check your messages
using another phone. Once you dial your
home number from any other phone and
enter the remote access code*, you will be
able to obtain the messages on your
answering machine. The keypad on the
phone you use to dial acts like the functions
on your answering machine where you can
play or delete messages, turn your
answering machine on or off, etc.
Note
This feature is deactivated by default.
* Remote access code (which is the same
as your Master PIN code) prevents any
unauthorised remote access of your
answering machine.
9.6.2.1 Activate/deactivate
remote access
Press
m key in idle mode, scroll
: to
ANSW MACHINE
and press
<
OK
, scroll : to
SETTINGS
and press
<
OK
, scroll : to
REMOTE ACC.
and press <
OK
.
Scroll
: to
ACTIVATE
or
DEACTIVATE
and press <
OK
to
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
2
1
2
1
2
cd155_ifu_master_uk.book Page 36 Tuesday, February 12, 2008 5:44 PM