Filter
Top Products
Advanced settings 29
8 Advanced settings
8.1 Change Master PIN
The Master PIN is used for registration/
unregistration of handsets and for
accessing the answering machine
remotely. The default Master PIN
number is 0000. The maximum length of
the Master PIN is 8 digits. This PIN is also
used to protect the settings of your
handset. Your handset will prompt you
whenever the PIN is required.
Note
The default pin code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN
code.
Press
m key in idle mode, scroll
: to
ADVANCED SET
and press
<
OK
, scroll : to
CHANGE PIN
and press
<
OK
.
Enter the current Master PIN when
prompted and press
<
OK
to
confirm.
• The PIN entered will be shown as
asterisks (*) on the screen.
Enter the new PIN and press
<
OK
to confirm
.
• A validation tone is emitted and the
screen returns to previous menu.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
See “Reset unit” on chapter 8.5 for more
details.
8.2 Registration
The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
To register your handset manually:
The Master PIN is required before you
can register or unregister handsets.
Note
By default, the Master PIN is 0000.
On the base station, press and hold
V for approximately 5 seconds.
LED indicator around the Play/Stop
key on the base station blinks.
On the handset, press
m key,
scroll
: to
ADVANCED SET
and
press
<
OK
, scroll : to
REGISTER
and press <
OK
.
Note
If no action is taken on the handset within
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
Enter the Master PIN when prompted
and press
<
OK
to confirm.
Note
By default, the Master PIN is 0000.
WAITING
_ _ is displayed on the
screen.
Note
If no action is taken on the handset within
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
1
2
3
1
2
3
4
cd155_ifu_master_uk.book Page 29 Tuesday, February 12, 2008 5:44 PM