Filter
Top Products
1.5 Before Leaving Your Desk
User Manual 69
• The FWD/DND button light shows the current status as follows:
Off: Neither feature is set.
Red on: Do Not Disturb (DND) mode
Flashing red slowly: FWD mode
• If a proprietary telephone (PT) user sets the FWD—Busy/No Answer feature, the FWD/
DND button light will keep flashing while on-hook. To stop the button from flashing, go off-
hook and enter "716#".
• A call can only be automatically forwarded one time.
In the example below, extension A's calls are being forwarded to extension B. If extension
B tries to set FWD to extension C, the extension B user hears a reorder tone and the
setting is denied. If extension B has already set FWD to extension C, and extension A tries
to set FWD to extension B, the setting is also denied.
• You can confirm the current FWD destination by pressing the FWD/DND button while on-
hook.
• CO-to-CO Line Call Duration
The length of outside-to-outside (CO-to-CO) line calls may be limited through system
programming.
Both the outside caller and the outside destination will hear a warning tone 15 seconds
before a specified time limit. When the timer expires, the call is disconnected.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit an FWD/DND (Call Forwarding/Do Not Disturb).
A
B C
A
B C