Filter
Top Products
Installing the DECT 122
7
Installing the base station
Place your product close enough to the telephone and mains power sockets so that the cables
will reach.To properly install the base station,plug the line cord and the power cable into the
base station.Plug the cord and the cable into the wall.If you have a broadband DSL Internet
connection,please make sure you have one DSL filter plugged directly on each line socket used
in the house and check the modem and the phone are plugged in the correct filter slot (one
specific for each).
Warning ! The electrical network is classified as hazardous according to criteria in the standard
EN 60-950.The only way to power down this product is to unplug the power supply from the
electrical outlet.Ensure the electrical outlet is located close to the apparatus and is always
easily accessible.
Please take care that the power supply and telephone line are connected to the correct sockets
as incorrect placement could damage your equipment.
Warning ! Always use the line cable provided with the product otherwise you may not have a dialling
tone.
Connect the power supply
Connect the telephone line cord
delivered with the product
DECT122_GBIE_09.qxd 27.09.2005 17:06 Seite 7