Philips DECT 122 Telephone User Manual


 
Advanced Settings
22
To set or change an SOS number
The SOS number feature allows you to enter 3 SOS phone numbers,which can be
dialed out although the call barring ist activated.The maximum length of an SOS
number is 4 digits.The PIN code is required when modify the SOS number.
Press ADVANCE SET
press Down 3 times press Down 4 times
SOS NUMBER
enter the PIN code*
to confirm.
scroll to select 1/2/3 enter the SOS number
To register a handset
Up to 5 handsets can be registered to the base station.
If you have inadvertently unregistered your handset,you can register it again.
Additional handsets must be registered to the base before use.
Warning : If you wish to register non Philips handsets to the DECT 122 base station,
make sure that this handset is GAP compliant otherwise it will not operate properly (see
page 3).
To register a handset,first press the paging key on the base for approx.5
seconds when the base is in idle mode.Then carry out the following steps on the
handset within ohne minute :
Press ADVANCE SET
press Down 3 times press Down 5 times
REGISTRATION to confirm.
enter the PIN code*
If the registration was successfull,a long confirmation tone is heard and the hand-
set number (1 to 5) will be assigned by the base automatically.
*By default the
PIN code is
0000
DECT122_GBIE_09.qxd 27.09.2005 17:06 Seite 22