Filter
Top Products
Conformity,environment and safety
2
Conformity, environment and safety
Safety information
This equipment is not designed to make emergency calls when the power fails.An alternative has
to be made available to allow emergency calls.
Conformity
Hereby,Philips declares that the DECT 122 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.This product can only be connected to the
analogue telephone networks of the countries mentioned on the packaging.
Power requirements
This product requires an electrical supply of 220-240 volts,alternating monophased power,
excluding IT installations defined in standard EN 60950.In case of power failure,the
communication can be lost.
Warning !
The electrical network is classified as hazardous according to criteria in the standard EN 60950.
The only way to power down this product is to unplug the power supply unit from the electrical
outlet.Ensure the electrical outlet is located close to the apparatus and is always easily
accessible.
Telephone connection
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages),as
defined in the standard EN 60950.
Safety precautions
Do not allow the handset to come into contact with water.Do not open the handset or the
base station.You could be exposed to high voltages.Do not allow the charging contacts or the
battery to come into contact with conductive materials.Never use any battery type other than
the one supplied :risk of explosion.
Environmental care
Please remember to observe the local regulations regarding the disposal of your packaging
materials,exhausted batteries and old phone and,where possible,promote their recycling.
Recycling & disposal
Disposal instructions for old products :
The purpose of the WEEE directive (Waste Electrical and Electronic Equipment;2002/96/EC) is
to ensure that products are recycled using best available treatment,recovery and recycling
techniques to ensure human health and high environmental protection.
Your product is designed and manufactured with high quality materials and components,which
can be recycled and reused.
Do not dispose of your old product in your general household waste bin.
Inform yourself about the local separate collection system for electrical and electronic
products marked by this symbol :
Use one of the following disposal options :
1. Dispose of the complete product (including its cables,
plugs and accessories) in the designated WEEE collection facilities.
2. If you purchase a replacement product,hand your complete old product back to the
retailer.He should accept it as required by the WEEE directive.
DECT122_GBIE_09.qxd 27.09.2005 17:06 Seite 2